Watch Tool Crystal Press and Case Closer Combination with Aluminum Dies

This combination case closer/crystal press beats anything in its price range and beyond. It is the best tool for closing watch cases and for pressing watch crystals into place. Don't destroy watch cases or case backs by using the wrong tool. Our combination press/closer will give you years of satisfaction and service. It comes with 14 reversible turned aluminum dies (pairs) which includes 14 deep dies (from 17mm to 44mm) and 14 flat dies (14mm to 42mm) that have been smoothed to a high polish to prevent scratching. There is also an additional bow shaped or hour-glass die with flat matching die for use with watch crystal which contain magnifiers, making a total of 30 dies in the set.

• 14 reversible, turned aluminum dies with 28 different sizes and magnified crystal die set as well
• 14 - deep dies measure 17-44mm, 15 - flat dies measure 14-42mm
• Metal dies are screw-on type for top and bottom
• Case press threads for screw on dies measures 7mm (inside/between threads) in diameter
• Maximum opening with one cupped die and one flat die is about 19.5mm
• Maximum opening with two cupped dies is about 21.5mm
• Dies screw onto the upper and lower part so that they can be inverted for case closing or crystal fitting
• Cast metal body with angled leverage for proper closure