Individual Five Sided Cutting Broaches .013 to .227 Inches Stub 15 to 80

Cutting, Cleaning and finishing broaches made of high quality steel and uniformly tempered for long life. Broaches will help jewelers or watchmakers increase the size of precision holes in metal material. These are made from hardened steel for strong cutting and long lasting use.

• Lengths vary from 1 3/4" to 7" inches
• Diameter is gauged slightly below largest portion of the cutting edges
• Sold per piece

  Stub Number	Total Length (MM)	Useful Length (MM)	Max Cut Width (Inch)	Max Cut Width (MM)	Minimum Cut Width (MM)		Stub Number	Total Length (MM)	Useful Length (MM)	Max Cut Width (Inch)	Max Cut Width (MM)	Minimum Cut Width (MM)		Stub Number	Total Length (MM)	Useful Length (MM)	Max Cut Width (Inch)	Max Cut Width (MM)	Minimum Cut Width (MM)
  01	162	107	.227"	5.75	4.80		40	125	82	.097	2.50	1.80		62	77.5	48	.038"	0.95	0.54
  02	160	105		5.50	4.50		41	122	80		2.40	1.75		64	75	47		0.90	0.50
  04	158	104		5.25	4.30		42	119	78		2.30	1.70		65	72.5	46	.033"	0.85	0.48
  08	156	103		5.00	4.10		44	116	76		2.20	1.60		66	70.5	44		0.80	0.45
  12	154	102		4.75	3.80		45	113	74	.081"	2.10	1.50		68	68	42	.031"	0.75	0.41
  16	151	100		4.50	3.60		46	110	72		2.00	1.40		70	66	41	.027"	0.70	0.37
  18	149	99		4.25	3.40		48	107	70	.075"	1.90	1.30		71	64	40		0.65	0.34
  22	147	98		4.00	3.10		49	104	68		1.80	1.20		72	62	38	.024"	0.60	0.30
  26	145	97		3.75	2.70		51	101	65	.067"	1.70	1.15		74	60	37		0.55	0.28
  28	142	96		3.50	2.60		52	98	63	.063"	1.60	1.10		75	58	36	.020"	0.50	0.25
  30	140	95	.127"	3.25	2.40		53	95	61		1.50	1.00		76	56	34		0.45	0.20
  31	138	93		3.00	2.20		54	92	59	.055"	1.40	0.90		78	54	33		0.40	0.15
  32	135	91		2.90	2.10		55	89	57	.050"	1.30	0.80		79	52	32		0.35	0.13
  35	132	89	.108"	2.80	2.05		56	86	54		1.20	0.70		80	50	31	.013"	0.30	0.10
  36	129	87		2.70	2.00		58	83	52	.042"	1.10	0.63
  38	127	85		2.60	1.90		60	80	50	.039"	1.00	0.57